GRINDING MACHINE FOR PLUGS 1.03.27
GRINDING MACHINE FOR PLUGS 1.03.27
The grinding machine 1 03 27 is a compact bench machine designed for the grinding of the two faces of little cylindrical samples (plugs).
The machine uses a diamond grinding wheel with glass-binder D46 ø 150 mm.
The grinding machine 1 03 27 is a compact bench machine designed for the grinding of the two faces of little cylindrical samples (plugs).
The machine uses a diamond grinding wheel with glass-binder D46 ø 150 mm.
The sample, clamped on a specific device, is mounted on an oscillating sample holder.
The turn of the set sample / sample holder is done without unclamping the sample.
This will allow a perfect parallelism of the two faces.
The watering (by flexible pipe) is directed to the wheel. A device including a micrometer controls the feed of the sample to grind.
A polypropylene tank collect the cooling water and the mud produced by the grinding process.
A front protection device prevent splashes.
Characteristics
Electrical
• Motor 0,5 CV, 2950 tr/min (230/400V tree
phase 50-60 Hz) (single phase 230V 50Hz in option)
• Emergency stop
Wheel
Diamond grinding wheel with glass binder D46 Ø 150 mm
Watering
By flexible pipe with stop cock.
Water in: Ø12mm
Water out: Ø25mm
Capacity
Plugs up to Ø38mm (1.5’’).
Option
Diamond grinding wheel with glass binder
D30 Ø 150 mm
single phase 230V 50Hz
Dimensions
Depth 400 mm
Width 500 mm
Height 360 mm
Weight 25 kg.
Additional information
Weight | 25 kg |
---|---|
Dimensions | 400 × 500 × 360 mm |