AERI BROTLAB | 60650 LE MONT SAINT ADRIEN | FRANCE | +33 3 44 82 88 88 commercial@brotlab.com

SLICING & GRINDING MACHINE RECTILAME 1.23.02

 

 

SLICING & GRINDING MACHINE RECTILAME 1.23.02

The Rectilame 1 23 02 is a bench type machine with two diamond tools.
The sawing head on the left of the machine, is fitted with a continuous rim disc designed for slicing the samples at around 150 µ.
The samples to be sawn are held on a swinging rock piece holder with micrometer motion enabling the sawing at around 150 µ of the rock samples stuck on the glass slides size : 30×45 or 45×60.
The watering (by flexible pipe) is directed towards the cutting edge. The operator swings the rock piece holder towards the disc.

Download the technical sheet – Fr
download icon

Download the technical sheet – En
download icon

Categories: ,

Special Features

The Rectilame 1 23 02 is a bench type machine with two diamond tools.
The sawing head on the left of the machine, is fitted with a continuous rim disc designed for slicing the samples at around 150 µ.
The samples to be sawn are held on a swinging rock piece holder with micrometer motion enabling the sawing at around 150 µ of the rock samples stuck on the glass slides size : 30x45 or 45x60.
The watering (by flexible pipe) is directed towards the cutting edge. The operator swings the rock piece holder towards the disc.
The grinding stand, on the right, is equipped with a diamond straight cup-wheel.
The sample, sticked on a glass slide it fitted on the swinging rock piece holder which could bear glass slides up to 45x60 mm. The watering (by flexible pipe) is directed towards the grinding-wheel.
The see-saw motion, combined with the micrometer motion, allows an accurate rectification up to the required thickness. The sample is then ready for the final polishing.
A draining with a flexible pipe is provided.

Features

Electrical

Three-phase 230 - 400 V 50 Hz 0.4 kW
Single phase 230V 50 Hz optional
Other on request
0.5 kW motor, 2900 rpm with sealed bearings

Watering

Water supply Ø 12 mm
Water Discharge Ø 25 mm
By flexible hoses with shut-off valve
Disc
The machine uses a continuous rim disc Ø200mm (levelling) thickness 2mm for incoming rocks.
(disc thickness 1,6mm, special hard rock available)

Grinding wheel
The machine uses a diamond wheel Ø150mm,
binder grain glass D46 (D30 grain available)

Dimensions

Depth 400 mm
Width 760 mm
Height 350 mm
Weight 43 kg.

STANDARD EQUIPMENT
1 disc Ø200mm for all coming rocks
1 Ø150mm Grinding Wheel

Additional information

Weight 43 kg
Dimensions 400 × 760 × 350 mm